– Conduct operational checks for blockages, aeration, and maintain correct water level.
– Use compressed air to clean air lines annually.
– Verify the proper operation of air blower(s).
– Replace blower air filters on an annual basis.
– Ensure adequate system ventilation.
– Clear media of any blockages caused by biomass buildup.
– Inspect manhole covers and frames for condition.
– Perform general washdown and jetting of the system.
– Grease main bearings or change Greaseomatics as needed.
– Check, adjust, and lubricate drive chains and belts as necessary.
– Conduct on-site effluent quality testing.
– Verify functionality of site control panel.
